D-Link DWS-4000 Series Cli Command Reference page 236

D-Link Unified Switch CLI Command Reference
channel-plan time
This command configures the channel plan time for each 802.11a/n and 802.11b/g/n frequency band. When the
corresponding channel plan mode is configured for time, this parameter indicates the time of day a new channel plan is
computed and applied.
Default 00:00
Format
channel-plan {an | bgn} time <hh:mm>
Mode Wireless Config
Parameter Description
an Configure channel plan mode for 802.11a/n.
bgn Configure channel plan mode for 802.11b/g/n.
hh:mm The channel plan time in 24 hour time.
Example: The following shows an example of the command.
DWS-4026 (Config wireless)# channel-plan an time 23:59 ?
<cr> Press Enter to execute the command.
no channel-plan time
The no version of this command returns the configured channel plan time to the default.
Format
channel-plan {an | bgn} time
Mode Wireless Config
channel-plan history-depth
This command configures the number of channel plan history iterations that are maintained for each 802.11a/n and 802.11b/
g/n frequency band. The number of iterations stored for each channel plan affects channel assignment; the channel
algorithm will not assign the same channel to an AP more than once within the number of stored iterations of the channel
plan.
Default 5
Format
channel-plan {an | bgn} history-depth <0-10>
Mode Wireless Config
Parameter Description
an Configure channel plan mode for 802.11a/n.
bgn Configure channel plan mode for 802.11b/g/n.
0-10 Channel plan history depth.
no channel-plan history-depth
The no version of this command returns the history depth for the channel plan to the default.
© 2009 D-Link Corporation. All Rights Reserved
228