Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
show sysinfo
This command displays switch information.
Format
show sysinfo
Mode
Privileged EXEC
Term
Definition
Switch Description Text used to identify this switch.
System Name
Name used to identify the switch.The factory default is blank. To configure the system name, see
"snmp-server" on page
System Location
Text used to identify the location of the switch. The factory default is blank. To configure the system
location, see
System Contact
Text used to identify a contact person for this switch. The factory default is blank. To configure the
system location, see
System ObjectID
The base object ID for the switch's enterprise MIB.
System Up Time
The time in days, hours and minutes since the last switch reboot.
MIBs Supported
A list of MIBs supported by this agent.
show tech-support
Use the show tech-support command to display system and configuration information when you contact technical
support. The output of the show tech-support command combines the output of the following commands:
•
show version
•
show sysinfo
•
show port all
•
show isdp neighbors
•
show logging
•
show event log
•
show logging buffered
•
show trap log
•
show running config
Format
show tech-support
Mode
Privileged EXEC
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e. pagination, for the show running-
config and show running-config all commands. The terminal length size is either zero or a number in the range of
5 to 48. After the user-configured number of lines is displayed in one page, the system prompts the user for --More-- or
(q)uit. Press q or Q to quit, or press any key to display the next set of <5-48> lines. The
© 2009 D-Link Corporation. All Rights Reserved
424
496.
"snmp-server" on page
496.
"snmp-server" on page
496.
Advertisement
Table of Contents
