D-Link DWS-4000 Series Cli Command Reference page 43

Participation
Definition
Options
auto The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this
VLAN unless a join request is received on this interface. This is equivalent to registration normal.
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid VLAN identification
number.
Format
vlan participation all {exclude | include | auto} <1-3965>
Mode Global Config
You can use the following participation options:
Participation
Definition
Options
include The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface will not participate in this
VLAN unless a join request is received on this interface. This is equivalent to registration normal.
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces.
Default all
Format
vlan port acceptframe all {vlanonly | all}
Mode Global Config
The modes defined as follows:
Mode Definition
VLAN Only mode Untagged frames or priority frames received on this interface are discarded.
Admit All mode Untagged frames or priority frames received on this interface are accepted and assigned the value of
the interface VLAN ID for this port.
With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged frames or
priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With
either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
no vlan port acceptframe all
Mode Global Config
VLAN Commands
35