D-Link DWS-4000 Series Cli Command Reference page 253

Default 1 – Default VLAN
Format
vlan <1-4094>
Mode Network Config
Parameter Description
1-4094 A valid VLAN ID.
no vlan
The no version of this command sets the default VLAN ID for the network to its default value.
Format
no vlan
Mode Network Config
hide-ssid
This command enables hiding of the SSID for this network. If enabled, the SSID is not included in the AP beacon frames.
Default Disable
Format
hide-ssid
Mode Network Config
no hide-ssid
The no version of this command disables hiding of the SSID for this network.
Format
no hide-ssid
Mode Network Config
client-qos access-control
This command configures the default access control list used by clients associated with this network that do not obtain their
own value via RADIUS. The <acl-name> parameter is a case-sensitive alphanumeric string from 1 to 31 characters. The
access list specified in this command must currently exist in the Unified Switch.
Format
client-qos access-control {down | up} {ip {<1-199> | <acl-name>}
Mode Network Config
no client-qos access-control
The no version of this command removes the client QoS default access control list parameter configured for this network.
Format
no client-qos access-control {down | up}
Mode Network Config
Wireless Network Commands
245