D-Link DWS-4000 Series Cli Command Reference page 266

D-Link Unified Switch CLI Command Reference
Format
no dot1x session-key-refresh-rate
Mode Network Config
clear (Network Config Mode)
This command restores a network configuration to default values.
Format
clear
Mode Network Config
show wireless network
This command displays the network configuration parameters. If no parameters are specified, a summary of the configured
networks is displayed, otherwise the detailed configuration is displayed.
Format
show wireless network [<1-64>]
Mode Privileged EXEC
Field
SSID
Interface ID
Default VLAN
Hide SSID
Deny Broadcast
Redirect Mode
Redirect URL
L2 Distributed Tunneling Mode
Bcast Key Refresh Rate
Session Key Refresh Rate
L3 Tunnel Mode
L3 Tunnel Status
L3 Tunnel Subnet IP
L3 Tunnel Subnet Mask
Wireless ARP Suppression
Security Mode
MAC Authentication
RADIUS Authentication Server
Name
RADIUS Authentication Server
Status
RADIUS Accounting Server Name RADIUS server name for accounting.
RADIUS Accounting Server
Status
© 2009 D-Link Corporation. All Rights Reserved
258
Description
Service Set Identifier.
Internal interface number for this network
Default VLAN for the network.
Indicates if SSID inclusion is suppressed from the beacons.
Indicates if probe requests with broadcast SSID are denied on the network.
Indicates the mode of client traffic redirection.
Indicates the configured URL for client HTTP redirection.
Indicates whether L2 distributed tunneling mode is enabled on the switch.
The interval after which the broadcast keys are changed.
the interval after which the Unicast session keys are changed
If tunneling feature is enabled, indicates if L3 roaming is enabled on the network.
Indicates the if the tunnel is up or down.
If tunneling feature is enabled, indicates the subnet for the tunnel.
If tunneling feature is enabled, indicates the network mask for the tunnel subnet.
Indicates whether wireless ARP suppression is enabled or disabled.
Indicates the authentication and encryption mode.
The client MAC address authentication mode.
RADIUS server name for authentication.
Indicates whether the specified named RADIUS Authentication server is configured in
the RADIUS Client configuration.
Indicates whether the specified named RADIUS Accounting server is configured in the
RADIUS Client configuration.