D-Link DWS-4000 Series Cli Command Reference page 332

D-Link Unified Switch CLI Command Reference
wids-security managed-ap-ssid-invalid
(Invalid SSID received from a managed AP Rogue Detection.) Use this command to enable rogue reporting for managed
AP's detected with an invalid SSID.
Default Enable
Format
wids-security managed-ap-ssid-invalid
Mode Wireless Config
no wids-security managed-ap-ssid-invalid
Use this command to disable the mode to report managed APs detected with an invalid SSID.
Format
no wids-security managed-ap-ssid-invalid
Mode Wireless Config
wids-security managed-ssid-secu-bad
(Managed SSID detected with incorrect security configuration Rogue Detection). Use this command to enable rogue
reporting for AP's detected with managed SSID's and an invalid security configuration.
Default Enable
Format
wids-security managed-ssid-secu-bad
Mode Wireless Config
no wids-security managed-ssid-secu-bad
Use this command to disable the mode to report AP's detected with managed SSID's and an invalid security configuration.
Format
no wids-security managed-ssid-secu-bad
Mode Wireless Config
wids-security rogue-det-trap-interval
(Rogue-detected trap interval.) Use this command to set the interval in seconds between transmissions of the trap telling
you that rogues are present in the RF Scan database.
Default 300
Format
wids-security rogue-det-trap-interval <60-3600>
Mode Wireless Config
Parameter Description
0, 60-3600 The interval in seconds between transmissions of the trap telling you that rogues are present in the RF
Scan database. The trap interval range is 60-3600 seconds. A configured value of 0 disables the trap
from being set.
© 2009 D-Link Corporation. All Rights Reserved
324