D-Link DWS-4000 Series Cli Command Reference page 316

D-Link Unified Switch CLI Command Reference
Field Description
Beacon Period Beacon interval for the neighbor AP network.
Initial Status If the AP is not rogue, then initial status is equal to "Status". For rogue APs, the initial status is the
classification prior to this AP becoming rogue. The valid values are:
• Managed - The neighbor AP is managed by this switch or another switch within the peer group. The
neighbor AP status can be referenced using its base MAC address.
• Unknown - The neighbor APs detected in the RF Scan are initially categorized as "Unknown" APs.
• Standalone - The AP is managed in standalone mode and configured as a valid AP entry (local or
RADIUS).
AP MAC Address If status indicates a managed AP, this indicates the base MAC address of the AP.
Radio Interface If status indicates a managed AP, this indicates the radio interface on the AP.
Discovered Age Time in seconds since this AP was first detected in an RF scan.
Security Mode Security used by this AP: Open, WEP, or WPA.
Highest Supported The highest supported rate advertised by this AP in the beacon frames. An integer value representing
Rate the number per 100Kbps.
802.11n Mode Flag indicating whether this AP supports 802.11n.
Ad Hoc Network Flag indicating that the beacon frame is received from an Ad hoc network. Possible values are: false-
Not Ad hoc, true-Ad hoc.
Peer Managed AP Flag indicating this AP is managed by a peer switch. Valid values are:
• Locally managed - AP is managed by the local switch.
• Peer managed - AP is managed by a peer switch.
Rogue Mitigation Status indicating whether rogue AP mitigation is in progress for this AP. If mitigation is not in progress
then this field displays the reason, which can be one of the following:
• Not Required (AP s not rogue)
• Already mitigating too many APs.
• AP Is operating on an illegal channel.
• AP is spoofing valid managed AP MAC address.
• AP is Ad hoc.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless ap rf-scan status
MAC Address
----------------- ---------------- -------- ------- --------------- -----------
00:01:01:02:01:03 Network3
00:01:01:02:03:02 Network2
00:33:01:02:01:83 Lobby
(DWS-4026) #show wireless ap 00:11:95:A3:7A:C8 rf-scan status
MAC Address.................................... 00:11:95:A3:7A:C8
SSID........................................... Guest Network
OUI............................................ Unknown
Physical Mode.................................. 802.11g
Channel........................................ 1
Status......................................... Rogue
Initial Status................................. Rogue
© 2009 D-Link Corporation. All Rights Reserved
308
Physical
SSID Mode
802.11g
802.11g
802.11g
Channel Status
6 Managed
6 Managed
6 Unknown
Discovered
Age
3h:28m:11s
3h:28m:14s
3h:28m:8s