D-Link DWS-4000 Series Cli Command Reference page 361

Default Disable
Format
radius-auth-server <server-name>
Mode Captive Portal Instance
no radius-auth-server
This command disables a captive portal configuration RADIUS authentication server.
Format
no radius-auth-server
Mode Captive Portal Instance
redirect-url mode
This command enables the redirect mode for a captive portal configuration.
Default Disable
Format
redirect-url mode
Mode Captive Portal Instance
no redirect-url mode
This command disables the redirect mode for a captive portal configuration.
Format
no redirect-url mode
Mode Captive Portal Instance
redirect-url
Use this command to specify the URL to which the newly authenticated client is redirected if the URL Redirect Mode is
enabled. This command is only available if the redirect mode is enabled.
Format
redirect-url <url>
Mode Captive Portal Instance
max-bandwidth-up
This command configures the maximum rate at which a client can send data into the network.
Captive Portal Configuration Commands
353