D-Link DWS-4000 Series Cli Command Reference page 350

D-Link Unified Switch CLI Command Reference
show wireless client detected-client triangulation
Use this command to display the signal triangulation status for the specified client entry.
Format
show wireless client <macaddr> detected-client triangulation
Mode Privileged EXEC
Field Description
AP Function Indicates whether the reporting AP is operating in Sentry Mode.
AP Mac Address The Ethernet address of the AP.
RSSI The RSSI value of received signal for the client at the reporting AP.
Signal The RF signal strength perceived by the reporting AP in dBm for the specified detected-client.
Noise The RF Noise perceived by the reporting AP for the specified detected-client.
Detected Time Time in seconds since the particular AP detected the signal.
show wireless wids-security client
Use this command to display the configured wireless WIDS security settings for the client.
Format
show wireless wids-security client
Mode Privileged EXEC
Field Description
Rogue Detected Interval, in seconds, between transmissions of the SNMP trap that indicates the administrator that
Trap Interval rogue APs are present in the RF Scan database. If set to 0, the trap is never sent.
Rogue-Not in If client MAC address is not in the Known Client database, then report the client as Rogue.
Known Client List
Rogue-Exceeds If the client exceeds the configured rate for transmitting 802.11 authentication requests, report the
Auth Req client as Rogue.
Rogue-Exceeds If the client exceeds the configured rate for transmitting 802.11 de-authentication requests, report the
DeAuth Reg client as Rogue.
Rogue-Exceeds If the client exceeds the configured rate for transmitting probe requests, report the client as Rogue.
Probe Req
Rogue-Exceeds If the client exceeds the maximum number of failing authentications, report the client as Rogue.
Failed Auth
Rogue-Auth If the Known Client is authenticated with an Unknown AP, report the client as Rogue.
Unknown AP
Client Threat- Indicates whether Client Threat Mitigation is enabled or not.
Mitigation
De-auth Threshold The number of seconds for counting the de-authentication messages.
Interval
De-auth Threshold The maximum number of de-authentication messages the client can send without being reported as
Value rogue.
Auth Threshold The number of seconds for counting the authentication messages.
Interval
© 2009 D-Link Corporation. All Rights Reserved
342