D-Link DWS-4000 Series Cli Command Reference page 455

no next-server
This command removes the boot server list.
Format
no next-server
Mode DHCP Pool Config
option
The option command configures DHCP Server options. The <code> parameter specifies the DHCP option code and
ranges from 1-254. The <ascii string> parameter specifies an NVT ASCII character string. ASCII character strings that
contain white space must be delimited by quotation marks. The hex <string> parameter specifies hexadecimal data. In
hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a period (for example,
a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c).
Default none
Format
option <code> {ascii string | hex <string1> [<string2>...<string8>] | ip
<address1> [<address2>...<address8>]}
Mode DHCP Pool Config
no option
This command removes the DHCP Server options. The <code> parameter specifies the DHCP option code.
Format
no option <code>
Mode DHCP Pool Config
ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-
address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format
ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP
addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Format
no ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
DHCP Server Commands
447