D-Link DWS-4000 Series Cli Command Reference page 46

D-Link Unified Switch CLI Command Reference
Default none
Format
protocol group <groupid> <vlanid>
Mode VLAN Config
no protocol group
This command removes the <vlanid> from this protocol-based VLAN group that is identified by this <groupid>.
Format
no protocol group <groupid> <vlanid>
Mode VLAN Config
protocol vlan group
This command adds the physical interface to the protocol-based VLAN identified by <groupid>. You can associate multiple
interfaces with a group, but you can only associate each interface and protocol combination with one group. If adding an
interface to a group causes any conflicts with protocols currently associated with the group, this command fails and the
interface(s) are not added to the group.
Default none
Format
protocol vlan group <groupid>
Mode Interface Config
no protocol vlan group
This command removes the interface from this protocol-based VLAN group that is identified by this <groupid>.
Format
no protocol vlan group <groupid>
Mode Interface Config
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by <groupid>. You can associate multiple
interfaces with a group, but you can only associate each interface and protocol combination with one group. If adding an
interface to a group causes any conflicts with protocols currently associated with the group, this command will fail and the
interface(s) will not be added to the group.
Default none
Format
protocol vlan group all <groupid>
Mode Global Config
no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by this <groupid>.
Format
no protocol vlan group all <groupid>
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
38