D-Link DWS-4000 Series Cli Command Reference page 402

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
Term
Definition
Committed Burst
The committed burst size, used in simple policing.
Size (KB)
Committed Rate
The committed rate, used in simple policing.
(Kbps)
Conform Action
The current setting for the action taken on a packet considered to conform to the policing parameters.
This is not displayed if policing is not in use for the class under this policy.
Conform COS
The CoS mark value if the conform action is set-cos-transmit.
Conform DSCP
The DSCP mark value if the conform action is set-dscp-transmit.
Value
Conform IP
The IP Precedence mark value if the conform action is set-prec-transmit.
Precedence Value
Drop
Drop a packet upon arrival. This is useful for emulating access control list operation using DiffServ,
especially when DiffServ and ACL cannot co-exist on the same interface.
Mark CoS
The class of service value that is set in the 802.1p header of inbound packets. This is not displayed if
the mark cos was not specified.
Mark IP DSCP
The mark/re-mark value used as the DSCP for traffic matching this class. This is not displayed if mark
ip description is not specified.
Mark IP
The mark/re-mark value used as the IP Precedence for traffic matching this class. This is not displayed
Precedence
if mark ip precedence is not specified.
Non-Conform
The current setting for the action taken on a packet considered to not conform to the policing
Action
parameters. This is not displayed if policing not in use for the class under this policy.
Non-Conform COS The CoS mark value if the non-conform action is set-cos-transmit.
Non-Conform
The DSCP mark value if the non-conform action is set-dscp-transmit.
DSCP Value
Non-Conform IP
The IP Precedence mark value if the non-conform action is set-prec-transmit.
Precedence Value
Policing Style
The style of policing, if any, used (simple).
If the Policy Name is not specified this command displays a list of all defined DiffServ policies. The following fields are
displayed:
Definition
Term
Policy Name
The name of this policy. (The order in which the policies are displayed is not necessarily the same order
in which they were created.)
Policy Type
The policy type (Only inbound is supported).
Class Members
List of all class names associated with this policy.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show policy-map p1
Policy Name.................................... p1
Policy Type.................................... In
Class Name..................................... test
This traffic will be dropped.
© 2009 D-Link Corporation. All Rights Reserved
394

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents