D-Link DWS-4000 Series Cli Command Reference page 333

no wids-security rogue-det-trap-interval
Use this command to restore the rogue detected trap interval to its default value.
Format
no wids-security rogue-det-trap-interval
Mode Wireless Config
wids-security standalone-cfg-invalid
(Standalone AP is operating with unexpected channel, SSID, security, or WIDS mode Rogue Detection.) Use this command
to enable rogue reporting for standalone APs operating with unexpected channel, SSID, security, or WIDS mode.
Default Enable
Format
wids-security standalone-cfg-invalid
Mode Wireless Config
no wids-security standalone-cfg-invalid
Use this command to disable the mode to report standalone AP's operating with unexpected channel, SSID, security, or
WIDS mode.
Format
no wids-security standalone-cfg-invalid
Mode Wireless Config
wids-security unknown-ap-managed-ssid
(Managed SSID received from unknown AP rogue.) Use this command to enable rogue reporting for unknown rogue APs
detected with a managed SSID.
Default Enable
Format
wids-security unknown-ap-managed-ssid
Mode Wireless Config
no wids-security unknown-ap-managed-ssid
Use this command to disable reporting unknown rogue APs detected with a managed SSID.
Format
no wids-security unknown-ap-managed-ssid
Mode Wireless Config
wids-security unmanaged-ap-wired
(Unmanaged AP is detected on a wired network Rogue Detection.) Use this command to enable rogue reporting for detection
of unmanaged AP's on a wired network.
WIDS Access Point RF Security Commands
325