D-Link DWS-4000 Series Cli Command Reference page 249

Default " " (empty string – any SSID is allowed).
Format
standalone ssid <name>
Mode AP Config
Parameter Description
name The service set ID must be between 1 and 32 characters. Use the no form of the command to configure
the AP to operate on any SSID.
no standalone ssid
The no version of this command configures the expected SSID for an AP in stand-alone mode.
Format
no standalone ssid
Mode AP Config
standalone wds-mode (Stand-alone AP expected WDS mode)
This command configures the expected WDS mode for an AP in stand-alone mode.
Default any
Format
standalone wds-mode {any | bridge | normal}
Mode AP Config
Parameter Description
any Operation as a bridge or in normal mode is allowed.
bridge Normal mode operation is not allowed. The stand-alone AP is expected to operate as a bridge.
normal Operation as a bridge is not allowed.
no standalone wds-mode
The no version of this command configures the expected WDS mode for an AP in stand-alone mode to the default – any
WDS mode is allowed.
show wireless ap database
This command displays the valid AP database entries. If no parameters are entered, a summary is displayed. You can enter
a MAC address to display detailed information for a specific AP.
Format
show wireless ap database [<macaddr>]
Mode Privileged EXEC
Field Description
macaddr The MAC Address corresponding to the AP's Ethernet interface.
Local Access Point Database Commands
241