Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
tacacs-server timeout
Use the tacacs-server timeout command to set the timeout value for communication with the TACACS+ servers. The
<timeout> parameter has a range of 1-30 and is the timeout value in seconds.
Default
5
Format
tacacs-server timeout <timeout>
Mode
Global Config
no tacacs-server timeout
Use the no tacacs-server timeout command to restore the default timeout value for all TACACS servers.
Format
no tacacs-server timeout
Mode
Global Config
key
Use the key command in TACACS Configuration mode to specify the authentication and encryption key for all TACACS
communications between the device and the TACACS server. This key must match the key used on the TACACS daemon.
The <key-string> parameter specifies the key name. For an empty string use " ". (Range: 0 - 128 characters).
Text-based configuration supports TACACS server's secrets in encrypted and non-encrypted format. When you save the
configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter
the key along with the encrypted keyword. In the show running config command's display, these secret keys are displayed
in encrypted format. You cannot show these keys in plain text format.
Format
key [<key-string> | encrypted <key-string>]
Mode
TACACS Config
port
Use the port command in TACACS Configuration mode to specify a server port number. The server <port-number>
range is 0 - 65535.
Default
49
Format
port <port-number>
Mode
TACACS Config
priority
Use the priority command in TACACS Configuration mode to specify the order in which servers are used, where 0 (zero)
is the highest priority. The <priority> parameter specifies the priority for servers. The highest priority is 0 (zero), and the
range is 0 - 65535.
Default
0
Format
priority <priority>
Mode
TACACS Config
© 2009 D-Link Corporation. All Rights Reserved
516
Advertisement
Table of Contents
