D-Link DWS-4000 Series Cli Command Reference page 437

Term Definition
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Number of messages received by the log process. This includes messages that are dropped or
Received ignored.
Log Messages Number of messages that could not be processed due to error or lack of resources.
Dropped
Log Messages Number of messages sent to the collector/relay.
Relayed
show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode Privileged EXEC
Term Definition
Buffered (In- Shows whether the In-Memory log is enabled or disabled.
Memory) Logging
Buffered Logging The behavior of the In Memory log when faced with a log full situation.
Wrapping Behavior
Buffered Log The count of valid entries in the buffered log.
Count
show logging hosts
This command displays all configured logging hosts. The <unit> is the switch identifier and has a range of 1-8.
Format
show logging hosts <unit>
Mode Privileged EXEC
Term Definition
Host Index (Used for deleting hosts.)
IP Address / IP address or hostname of the logging host.
Hostname
Severity Level The minimum severity to log to the specified address. The possible values are emergency (0), alert
(1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host from which syslog messages are sent.
Host Status The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
show logging traplogs
This command displays SNMP trap events and statistics.
Format
show logging traplogs
Mode Privileged EXEC
Logging Commands
429