D-Link DWS-4000 Series Cli Command Reference page 226

D-Link Unified Switch CLI Command Reference
WLAN Bytes Transmitted......................... 560
WLAN Packets Received.......................... 45
WLAN Packets Transmitted....................... 78
WLAN Bytes Receive Dropped..................... 0
WLAN Bytes Transmit Dropped.................... 0
WLAN Packets Receive Dropped................... 0
WLAN Packets Transmit Dropped.................. 0
On the switch that is not acting as a Cluster Controller the summary command displays entries in the following format:
(DWS-4026) #show wireless switch 192.168.37.60 statistics <cr>
Error! Only ClusterController can display the peer switch statistics.
(DWS-4026) #show wireless switch 192.168.37.61 statistics <cr>
WLAN Bytes Received............................ 320
WLAN Bytes Transmitted......................... 560
WLAN Packets Received.......................... 45
WLAN Packets Transmitted....................... 78
WLAN Bytes Receive Dropped..................... 0
WLAN Bytes Transmit Dropped.................... 0
WLAN Packets Receive Dropped................... 0
WLAN Packets Transmit Dropped.................. 0
The local switch statistics can also be displayed using the following command format:
(DWS-4026) #show wireless switch local statistics <cr>
WLAN Bytes Received............................ 320
WLAN Bytes Transmitted......................... 560
WLAN Packets Received.......................... 45
WLAN Packets Transmitted....................... 78
WLAN Bytes Receive Dropped..................... 0
WLAN Bytes Transmit Dropped.................... 0
WLAN Packets Receive Dropped................... 0
WLAN Packets Transmit Dropped.................. 0
show wireless trapflags
This show command displays the configured Unified Switch SNMP trap modes.
Format
show wireless trapflags
Mode Privileged EXEC
Field Description
AP Failure Traps Shows whether AP Failure Traps are enabled.
AP State Change Shows whether AP State Change Traps are enabled.
Traps
Client Failure Shows whether Client Failure Traps are enabled.
Traps
Client State Shows whether Client State Change Traps are enabled.
Change Traps
Peer Switch Traps Shows whether Peer Switch Traps are enabled.
© 2009 D-Link Corporation. All Rights Reserved
218