D-Link DWS-4000 Series Cli Command Reference page 543

Component Message
Driver USL: No available entries in the STG table
Driver USL: failed to sync stg table on unit = x
Driver USL: A Trunk doesn't exist in USL
Driver USL: A Trunk being created by bcmx already
existed in USL
Driver USL: A Trunk being destroyed doesn't exist in USL Possible synchronization issue between the
Driver USL: A Trunk being set doesn't exist in USL
Driver USL: failed to sync trunk table on unit = x
Driver USL: Mcast entry not found on a join
Driver USL: Mcast entry not found on a leave
Driver USL: failed to sync dvlan data on unit = x
Driver USL: failed to sync policy table on unit = x
Driver USL: failed to sync VLAN table on unit = x
Driver Invalid LAG id x
Driver Invalid uport calculated from the BCM uport
bcmx_l2_addr->lport = x
Driver Invalid USP calculated from the BCM
uport\nbcmx_l2_addr->lport = x
Driver Unable to insert route R/P
Driver Unable to Insert host H
Driver USL: failed to sync L3 Intf table on unit = x
Driver USL: failed to sync L3 Host table on unit = x
Driver USL: failed to sync L3 Route table on unit = x
Table 51: Driver Error Messages (Cont.)
Cause
The Spanning Tree Group table is full in USL.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Attempting to modify a Trunk that doesn't exist.
Possible synchronization issue between the
application, hardware, and sync layer.
application, hardware, and sync layer.
Possible synchronization issue between the
application, hardware, and sync layer.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Possible synchronization issue between the
application, hardware, and sync layer.
Possible synchronization issue between the
application, hardware, and sync layer.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Possible synchronization issue between the BCM
driver and HAPI.
Uport not valid from BCM driver.
USP not able to be calculated from the learn event
for BCM driver.
Route R with prefix P could not be inserted in the
hardware route table. A retry will be issued.
Host H could not be inserted in hardware host
table. A retry will be issued.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Could not synchronize unit x due to a transport
failure or API issue on remote unit. A
synchronization retry will be issued.
Technologies
535