D-Link DWS-4000 Series Cli Command Reference page 220

D-Link Unified Switch CLI Command Reference
Field Description
ouival OUI Value of the vendor of AP/Client.
oui Organization name for the OUI.
Example:
OUI Value
--------------------
00:11:11
00:11:12
(DWS-4026) #
show wireless discovery
This show command displays the configured Unified Switch discovery methods.
Format
show wireless discovery
Mode Privileged EXEC
Field Description
IP Polling Mode Shows whether the L3 IP Polling discovery method is enabled.
L2 Multicast Shows whether the L2 Multicast Discovery Mode is enabled.
Discovery Mode
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless discovery
IP Polling Mode ............................... Enabled
L2 Multicast Discovery Mode ................... Enabled
show wireless discovery ip-list
This show command displays the configured Unified Switch IP polling list and the polling status for each configured IP
address for discovery.
Format
show wireless discovery ip-list
Mode Privileged EXEC
Field Description
IP Address Shows the IP addresses configured in the L3/IP Discovery List.
Status Shows the L3 discovery status. Possible values are Not Polled , Unreachable , or Discovered .
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless discovery ip-list
© 2009 D-Link Corporation. All Rights Reserved
212
OUI Description
--------------------------------
Andreys OUI