D-Link DWS-4000 Series Cli Command Reference page 213

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

trapflags (Wireless Config Mode)
This command enables Unified Switch SNMP trap groups for wireless system events. If no parameters are specified, then
all traps are enabled.
Default
All - Disable
Format
trapflags [{ap-failure | ap-state | client-state | peer-ws | rf-scan | rogue-
ap | ws-status}]
Mode
Wireless Config
Parameter
Description
ap-failure
Enable/Disable SNMP traps associated with AP association/authentication failures.
ap-state
Enable/Disable SNMP traps associated with AP state changes.
client-failure
Enable/Disable SNMP traps associated with client association/authentication failures.
client-state
Enable/Disable SNMP traps associated with client state changes.
peer-ws
Enable/Disable SNMP traps associated with peer Unified Switch events.
rf-scan
Enable/Disable SNMP traps associated with RF scan related events.
rogue-ap
Enable/Disable SNMP traps associated with rogue access points.
ws-status
Enable/Disable SNMP traps associated with wireless status events.
wids-status
Enable/Disable SNMP traps for WIDS status events.
no trapflags
The no version of this command disables Unified Switch SNMP trap groups for wireless system events. If no parameters are
specified, then all traps are disabled.
Format
no trapflags [{ap-failure | ap-state | client-state | peer-ws | rf-scan | rogue-
ap | ws-status}]
Mode
Wireless Config
agetime
This command configures database entry age times for the Unified Switch. A time value of 0 indicates entries in the
corresponding database will not age and you must manually delete them.
Default
24 hours
Format
agetime {ad-hoc | ap-failure | client-failure | rf-scan |detected-client} <0,1-
168>
Mode
Wireless Config
Parameter
Description
ad-hoc
Time in hours to maintain an entry in the ad hoc client network list.
ap-failure
Time in hours to maintain an entry in the AP association and authentication failure list.
client-failure
Time in hours to maintain an entry in the client association and authentication failure list.
Unified Switch Commands
205

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents