D-Link DWS-4000 Series Cli Command Reference page 505

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community name.
Format
no snmp-server community ipaddr <name>
Mode
Global Config
snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the associated community SNMP packet
sending address and is used along with the client IP address value to denote a range of IP addresses from which SNMP
clients may use that community to access the device. A value of 255.255.255.255 will allow access from only one station,
and will use that machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from any IP address.
The name is the applicable community name.
Default
0.0.0.0
Format
snmp-server community ipmask <ipmask> <name>
Mode
Global Config
no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The
community name may be up to 16 alphanumeric characters.
Format
no snmp-server community ipmask <name>
Mode
Global Config
snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager associated with this
community manages the switch according to its access right. If the community is disabled, no SNMP requests using this
community are accepted. In this case the SNMP manager associated with this community cannot manage the switch until
the Status is changed back to Enable.
Default
• private and public communities - enabled
• other four - disabled
Format
snmp-server community mode <name>
Mode
Global Config
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests using this community are
accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is
changed back to Enable.
Format
no snmp-server community mode <name>
Mode
Global Config
SNMP Commands
497

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents