Table of Contents
Advertisement
no ip http session soft-timeout
This command resets the soft timeout for un-secure HTTP sessions to the default value.
Format
no ip http session soft-timeout
Mode
Privileged EXEC
ip http secure-session hard-timeout
This command configures the hard timeout for secure HTTP sessions in hours. When this timeout expires, the user is forced
to re-authenticate. This timer begins on initiation of the Web session and is unaffected by the activity level of the connection.
The secure-session hard-timeout can not be set to zero (infinite).
Default
24
Format
ip http secure-session hard-timeout <1-168>
Mode
Privileged EXEC
no ip http secure-session hard-timeout
This command resets the hard timeout for secure HTTP sessions to the default value.
Format
no ip http secure-session hard-timeout
Mode
Privileged EXEC
ip http secure-session maxsessions
This command limits the number of secure HTTP sessions. Zero is the configurable minimum.
Default
16
Format
ip http secure-session maxsessions <0-16>
Mode
Privileged EXEC
no ip http secure-session maxsessions
This command restores the number of allowable secure HTTP sessions to the default value.
Format
no ip http secure-session maxsessions
Mode
Privileged EXEC
ip http secure-session soft-timeout
This command configures the soft timeout for secure HTTP sessions in minutes. Configuring this value to zero will give an
infinite soft-timeout. When this timeout expires, you are forced to re-authenticate. This timer begins on initiation of the Web
session and is re-started with each access to the switch. The secure-session soft-timeout can not be set to zero (infinite).
Default
5
Format
ip http secure-session soft-timeout <1-60>
Mode
Privileged EXEC
Hypertext Transfer Protocol Commands
487
Advertisement
Table of Contents
