D-Link DWS-4000 Series Cli Command Reference page 285

Parameter Description
rate A valid rate based on the radio mode. When the radio is operating in the 5 GHz band, values are 6,
11, 12, 18, 24, 36, 48, and 54 Mbps. When the radio is operating in the 2.4 GHz band, the values are
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps. When set to 0, the multicast transmission rate
selection is automatic.
no multicast tx-rate
The no version of this command sets the multicast transmit rate to 0.
Format
no multicast tx-rate
Mode AP Profile Radio Config
u-apsd
This command enables the unscheduled automatic power save delivery mode for the radio.
Default Enabled
Format
u-apsd
Mode AP Profile Radio Config
no u-apsd
The no version of this command disables the unscheduled automatic power save delivery mode for the radio.
Format
no u-apsd
Mode AP Profile Radio Config
incorrect-frame-no-ack
This command configures the radio to not send any acknowledgement for incorrectly received frames.
Default Enabled
Format
incorrect-frame-no-ack
Mode AP Profile Radio Config
no incorrect-frame-no-ack
The no version of this command configures the radio to send the acknowledgement for the incorrectly received frames.
Format
no incorrect-frame-no-ack
Mode AP Profile Radio Config
show wireless ap profile radio
This command displays the radio configuration for an AP profile. When you enter the required profile ID, a summary view of
the radio configuration is displayed. If you enter a radio index, the radio configuration detail is displayed.
Access Point Profile RF Commands
277