Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
channel auto
This command enables auto channel adjustment for the radio. This indicates the initial AP channel assignment can be
automatically adjusted by the switch.
Default
Disabled
Format
channel auto
Mode
AP Profile Radio Config
no channel auto
The no version of this command without any parameters disables auto channel adjustment for the radio.
Format
no channel auto
Mode
AP Profile Radio Config
channel auto-eligible
This command enables either one or all of the supported channels on the radio to be eligible for auto-channel selection. If
you specify one channel, the command will succeed only if this channel is supported by the current mode of the radio (use
show wireless ap profile XX radio XX auto-eligible for valid values). If you supply "all" as the argument for
this command, all channels supported by the current radio mode will be enabled for automatic selection.
Default
Either all supported channels are enabled, or only channels 1, 6, and 11 if supported by the current
radiomode (e.g. 802.11 b/g).
Format
channel auto-eligible {all | <1-255>}
Mode
AP Profile Radio Config
no channel auto-eligible
The no version of this command removes either one or all of the channels currently available for automatic selection from
consideration on the radio. If you specify one channel, the command will succeed only if this channel is currently available
for automatic selection on the radio. If you supply all as the argument for this command, all channels currently available on
the radio will be disabled.
Format
no channel auto-eligible {all | <1-255>}
Mode
AP Profile Radio Config
power auto
This command enables auto power adjustment for the radio. This indicates the AP power assignment can be automatically
adjusted by the switch.
Default
Disabled
Format
power auto
Mode
AP Profile Radio Config
© 2009 D-Link Corporation. All Rights Reserved
272
Advertisement
Table of Contents
