D-Link DWS-4000 Series Cli Command Reference page 148

D-Link Unified Switch CLI Command Reference
no ldp med confignotification
Use this command to disable notifications.
Format
no lldp med confignotification
Mode Interface Config
lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be transmitted in the Link
Layer Discovery Protocol Data Units (LLDPDUs).
Default By default, the capabilities and network policy TLVs are included.
Format
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
[network-policy]
Mode Interface Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
no lldp med transmit-tlv
Use this command to remove a TLV.
Format
no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-pd]
[location] [inventory]
Mode Interface Config
lldp med all
Use this command to configure LLDP-MED on all the ports.
Format
lldp med all
Mode Global Config
lldp med confignotification all
Use this command to configure all the ports to send the topology change notification.
Format
lldp med confignotification all
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
140