Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Default
Default-RADIUS-Server – authentication server name
Default-RADIUS-Server – accounting server name
Format
radius server–name {auth | acct} <name>
Mode
Network Config
Parameter
Description
name
Enter an alphanumeric string up to 32 characters in length.
no radius server-name
The no version of this command sets the RADIUS authentication/accounting server name to the default value.
Format
no radius server–name {auth | acct}
Mode
Network Config
Example: The following shows an example of the command.
(DWS-4026) #radius server-name auth
<cr>
Press Enter to execute the command.
(DWS-4026) #no radius server-name auth ?
<cr>
Press Enter to execute the command.
(DWS-4026) #radius server-name acct
<cr>
Press Enter to execute the command.
(DWS-4026) #no radius server-name acct
<cr>
Press Enter to execute the command.
radius use–network–configuration
This command configures the system to use the network RADIUS configuration for wireless client's authentication on this
network or to use global RADIUS configuration.
Default
Enable
Format
radius use–network–configuration
Mode
Network Config
no radius use–network–configuration
The no version of this command configures the system to use the network RADIUS configuration for authentication of
wireless clients on this network.
Format
no radius use–network–configuration
Mode
Network Config
Example: The following shows an example of the command.
(DWS-4026) # radius use-network-configuration ?
© 2009 D-Link Corporation. All Rights Reserved
252
"Wireless_Network-1 Auth_Server 1" ?
"Wireless_Network-1 Acct_Server 1" ?
?
Advertisement
Table of Contents
