Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a pool address as part
of a ping operation. By default the number of packets sent to a pool address is 2, which is the smallest allowed number when
sending packets. Setting the number of packets to 0 disables this command.
Default
2
Format
ip dhcp ping packets <0,2-10>
Mode
Global Config
no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of packets to 0.
Default
0
Format
no ip dhcp ping packets
Mode
Global Config
service dhcp
This command enables the DHCP server.
Default
disabled
Format
service dhcp
Mode
Global Config
no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode
Global Config
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from the automatic address
pool.
Default
disabled
Format
ip dhcp bootp automatic
Mode
Global Config
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the automatic address pool.
Format
no ip dhcp bootp automatic
Mode
Global Config
© 2009 D-Link Corporation. All Rights Reserved
448
Advertisement
Table of Contents
