D-Link DWS-4000 Series Cli Command Reference page 130

D-Link Unified Switch CLI Command Reference
Format
no set igmp maxresponse <vlan_id>
Mode VLAN Config
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the system, on a particular interface or
VLAN. This is the amount of time in seconds that a switch waits for a query to be received on an interface before the interface
is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates
an infinite time-out, i.e. no expiration.
Default 0
Format
set igmp mcrtrexpiretime <0-3600>
Mode • Global Config
• Interface Config
Format
set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the system, on a particular interface
or a VLAN.
Format
no set igmp mcrtrexpiretime
Mode • Global Config
• Interface Config
Format
no set igmp mcrtrexpiretime <vlan_id>
Mode VLAN Config
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode enabled.
Format
set igmp mrouter <vlan_id>
Mode Interface Config
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format
no set igmp mrouter <vlan_id>
Mode Interface Config
© 2009 D-Link Corporation. All Rights Reserved
122