Access Commands - D-Link DWS-4000 Series Cli Command Reference

Term Definition
HTTP Session Soft The soft timeout for un-secure http sessions in minutes.
Timeout
HTTP Mode The secure HTTP server administrative mode.
(Secure)
Secure Port The secure HTTP server port number.
Secure Protocol The protocol level may have the values of SSL3, TSL1, or both SSL3 and TSL1.
Level(s)
Maximum The number of allowable secure http sessions.
Allowable HTTPS
Sessions
HTTPS Session The hard timeout for secure http sessions in hours.
Hard Timeout
HTTPS Session The soft timeout for secure http sessions in minutes.
Soft Timeout
Certificate Present Indicates whether the secure-server certificate files are present on the device.
Certificate Indicates whether certificate generation is currently in progress.
Generation in
Progress
A C
CCESS OMMANDS
Use the commands in this section to close remote connections or to view information about connections to the system.
disconnect
Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to close all active sessions, or
use <session-id> to specify the session ID to close. To view the possible values for <session-id>, use the show
loginsession command.
Format
disconnect {<session_id> | all}
Mode Privileged EXEC
show loginsession
This command displays current Telnet and serial port connections to the switch.
Format
show loginsession
Mode Privileged EXEC
Term Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time Time this session has been idle.

Access Commands

489