D-Link DWS-4000 Series Cli Command Reference page 225

Distributed Tunnel Clients..................... 0
WLAN Utilization............................... 0 %
On the switch that is not acting as a Cluster Controller the summary command displays entries in the following format:
(DWS-4026) #show wireless switch 192.168.37.60 status
Error! Only Cluster Controller can display the peer switch status parameters.
(DWS-4026) #show wireless switch 192.168.37.61 status
Switch IP Address ............................. 192.168.37.61
Cluster Priority............................... 1
Total Access Points............................ 5
Managed Access Points.......................... 3
Connection Failed Access Points................ 1
Discovered Access Points....................... 1
Total Clients.................................. 3
Associated Clients............................. 1
Authenticated Clients.......................... 2
Standalone Access Points....................... 0
WLAN Utilization............................... 10 %
show wireless switch statistics
This show command displays the current Unified Switch statistics. If the Unified Switch is a Cluster Controller, then this
command shows per switch statistics for all the switches in the wireless system. For the switch that is not acting as a Cluster
controller, only the local statistics are displayed.
Format
show wireless {<ipaddr>|local} statistics
Mode Privileged EXEC
Field Description
ipaddr IP address of the Unified Switch in the wireless system.
Example: The following shows example CLI display output for the command.
If a network consists of two switches 192.168.37.60 and 192.168.37.61 respectively and former is the Cluster Controller,
this command works differently at Cluster Controller and the peer switch which is not a Cluster Controller as follows.
On the Cluster Controller, it displays entries in the following format:
(DWS-4026) #show wireless switch 192.168.37.60 statistics <cr>
WLAN Bytes Received............................ 1873
WLAN Bytes Transmitted......................... 8234
WLAN Packets Received.......................... 233
WLAN Packets Transmitted....................... 435
WLAN Bytes Receive Dropped..................... 0
WLAN Bytes Transmit Dropped.................... 0
WLAN Packets Receive Dropped................... 0
WLAN Packets Transmit Dropped.................. 0
(DWS-4026) #show wireless switch 192.168.37.61 statistics <cr>
WLAN Bytes Received............................ 320
Unified Switch Commands
217