D-Link DWS-4000 Series Cli Command Reference page 243

Format
show wireless peer-switch [<ipaddr>] configure status
Mode Privileged EXEC
Field Description
ipaddr The <ipaddr> is a valid IP address.
IP Address The IP address of the peer switch.
Configuration The peer switch IP address last config received.
Switch IP Address
Configuration Config push status from the Unified Switch to this peer switch.
Status
Configuration Configuration groups received as part of config push from the peer switch.
Received
Rx Time The time the config push was received from the peer switch.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless peer-switch configure status
IP Address
---------------
10.0.0.100
10.0.0.101
10.0.0.102
(DWS-4026) #show wireless peer-switch 10.0.0.100 configure status
IP Address.................................... 10.0.0.100
Configuration Switch IP Address.
Configuration Status
Configuration Received........................ AP Database,
Rx Time .................
show wireless peer-switch ap status
This command displays the operational status for a peer Unified Switch-managed AP. If no parameters are specified, the
command will display a summary of all Unified Switch-managed APs. If an AP MAC address is specified, the detailed status
is displayed.
Format
show wireless peer-switch [<ipaddr>] ap [<macaddr>] status
Mode Privileged EXEC
Field Description
ipaddr The <ipaddr> is a valid IP address.
Configuration
Switch IP Address
------ --------------------
10.254.22.1
10.254.22.1
10.254.22.1
........................ Failure Invalid Code Version
Known-Client
Configuration
--------
AP Database,AP Profile..
AP Database,AP Profile..
AP Profile,Channel..
... ..... 10.254.22.1
AP Profile,
Channel Power,
Discovery,
Global,
JAN 03 23:32:06 1970
Peer Unified Switch Commands
Rx Time
--------- -----------
JAN 03 23:32:06 1970
JAN 03 23:32:06 1970
JAN 03 23:32:06 1970
235