D-Link DWS-4000 Series Cli Command Reference page 259

no wep key length
The no version of this command returns the WEP key length to its default value.
Format
no wep key length
Mode Network Config
mac authentication
This command enables and configures the mode for client MAC authentication on the network.
Default Disable
Format
mac authentication {local | radius}
Mode Network Config
Parameter Description
local Enable MAC authentication using the AP profile MAC authentication list.
radius Enable MAC authentication using the configured RADIUS server.
no mac authentication
The no version of this command disables MAC authentication on the network.
Format
no mac authentication
Mode Network Config
radius server secret (Network Config)
This command configures the secret to use in communicating with the configured RADIUS server. The secret must be a
printable string in the range 0-64 characters. When the command is entered, you will be prompted to enter the secret and
then again to confirm the secret.
Format
radius server secret
Mode Network Config
Example: The following shows an example of the command.
DWS-4026 (Config-network)# radius server secret
Enter Secret (65 characters max):<enter here>
Re-enter Secret:<enter same here>
radius server-name
This command configures the RADIUS authentication/accounting server name for wireless clients authenticating to this
network. The server name can contain alphanumeric characters plus –, _, and space.
Wireless Network Commands
251