D-Link DWS-4000 Series Cli Command Reference page 73

Term Definition
EAP Response The number of valid EAP response frames (other than resp/id frames) that have been received by this
Frames Received authenticator.
EAP Request/Id The number of EAP request/identity frames that have been transmitted by this authenticator.
Frames
Transmitted
EAP Request The number of EAP request frames (other than request/identity frames) that have been transmitted by
Frames this authenticator.
Transmitted
Invalid EAPOL The number of EAPOL frames that have been received by this authenticator in which the frame type
Frames Received is not recognized.
EAP Length Error The number of EAPOL frames that have been received by this authenticator in which the frame type
Frames Received is not recognized.
show dot1x clients
This command displays 802.1x client information.
Format
show dot1x clients {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Logical Interface The logical port number associated with a client.
Interface The physical port to which the supplicant is associated.
User Name The user name used by the client to authenticate to the server.
Supplicant MAC The supplicant device MAC address.
Address
Session Time The time since the supplicant is logged on.
Filter ID Identifies the Filter ID returned by the RADIUS server when the client was authenticated. This is a
configured DiffServ policy name on the switch.
VLAN ID The VLAN assigned to the port.
VLAN Assigned The reason the VLAN identified in the VLAN ID field has been assigned to the port. Possible values
are RADIUS, Unauthenticated VLAN, or Default. When the VLAN Assigned reason is Default, it means
that the VLAN was assigned to the port because the PVID of the port was that VLAN ID.
Session Timeout This value indicates the time for which the given session is valid. The time period in seconds is
returned by the RADIUS server on authentication of the port. This value is valid for the port only when
the port-control mode is not MAC-based.
Session This value indicates the action to be taken once the session timeout expires. Possible values are
Termination Action Default and Radius-Request. If the value is Default, the session is terminated and client details are
cleared. If the value is Radius-Request, then a reauthentication of the client is performed.
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format
show dot1x users <slot/port>
Mode Privileged EXEC
Port-Based Network Access Control Commands
65