Ip Helper Commands - D-Link DWS-4000 Series Cli Command Reference

no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay minwaittime
Mode Global Config
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format
show bootpdhcprelay
Modes • Privileged EXEC
• User EXEC
Term Definition
Maximum Hop The maximum allowable relay agent hops.
Count
Minimum Wait The minimum wait time.
Time (Seconds)
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP Address The IP address for the BootP/DHCP Relay server.
Circuit Id Option The DHCP circuit Id option which may be enabled or disabled.
Mode
Requests Received The number or requests received.
Requests Relayed The number of requests relayed.
Packets Discarded The number of packets discarded.
IP H C
ELPER OMMANDS
This section describes the commands to configure a DHCP relay agent with multiple DHCP server addresses per routing
interface, and to use different server addresses for client packets arriving on different interfaces on the relay agent.
ip helper-address
Use this command to add a unicast helper address to the list of helper addresses on an interface. This is the address of a
DHCP server. This command can be applied multiple times on the routing interface to form the helper addresses list until
the list reaches the maximum supported helper addresses.
Format
ip helper-address <ip-address>
Mode Interface Config

IP Helper Commands

189