D-Link DWS-4000 Series Cli Command Reference page 514

D-Link Unified Switch CLI Command Reference
Field Description
ipaddr The IP address of the server.
dnsname The DNS name of the server.
0-65535 The port number to use to connect to the specified RADIUS server.
servername The alias name to identify the server.
no radius server host
The version of this command deletes the configured server entry from the list of configured RADIUS servers. If the
no
RADIUS authenticating server being removed is the active server in the servers that are identified by the same server name,
then the RADIUS client selects another server for making RADIUS transactions. If the 'auth' token is used, the previously
configured RADIUS authentication server is removed from the configuration. Similarly, if the 'acct' token is used, the
previously configured RADIUS accounting server is removed from the configuration. The <ipaddr|dnsname> parameter
must match the IP address or dns name of the previously configured RADIUS authentication / accounting server.
Format
no radius server host {auth | acct} {<ipaddr|dnsname>}
Mode Global Config
Example: The following shows an example of the command.
(DWS-4026) (Config) #radius server host acct 192.168.37.60
(DWS-4026) (Config) #radius server host acct 192.168.37.60 port 1813
(DWS-4026) (Config) #radius server host auth 192.168.37.60 name
Network1_RADIUS_Auth_Server port 1813
(DWS-4026) (Config) #radius server host acct 192.168.37.60 name Network2_RADIUS_Auth_Server
(DWS-4026) (Config) #no radius server host acct 192.168.37.60
radius server key
This command configures the key to be used in RADIUS client communication with the specified server. Depending on
whether the 'auth' or 'acct' token is used, the shared secret is configured for the RADIUS authentication or RADIUS
accounting server. The IP address or hostname provided must match a previously configured server. When this command
is executed, the secret is prompted.
Text-based configuration supports Radius server's secrets in encrypted and non-encrypted format. When you save the
configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter
the key along with the encrypted keyword. In the show running config command's display, these secret keys are displayed
in encrypted format. You cannot show these keys in plain text format.
Note: The secret must be an alphanumeric value not exceeding 16 characters.
Format
radius server key {auth | acct} {<ipaddr|dnsname>} encrypted <password>
Mode Global Config
Field Description
ipaddr The IP address of the server.
© 2009 D-Link Corporation. All Rights Reserved
506