D-Link DWS-4000 Series Cli Command Reference page 298

D-Link Unified Switch CLI Command Reference
clear wireless ap failed
This command deletes one or all managed AP entries with a failed status. A failed status indicates the Unified Switch has
lost contact with the managed AP.
Format
clear wireless ap failed [<macaddr>]
Mode Privileged EXEC
Parameter Description
macaddr Managed AP MAC Address.
Example: The following shows an example of the command.
(DWS-4026) #clear wireless ap failed
Are you sure you want to clear all failed managed AP entries? (y/n) y
All managed AP failed entries cleared.
clear wireless ap neighbors
This command deletes entries from the managed AP client and AP neighbor lists. Note that client neighbor entries added
via a client association to the managed AP will not be cleared; these are only removed by the system when a client
disassociates.
Format
clear wireless ap neighbors <macaddr>
Mode Privileged EXEC
Example: The following shows an example of the command.
(DWS-4026) #clear wireless ap neighbors
Are you sure you want to clear managed AP neighbors (associated client neighbors will not
be cleared)? (y/n) y
Managed AP neighbor entries cleared.
show wireless ap status
This command displays operational status for a WS managed AP. If no parameters are specified, a summary of all managed
APs is displayed. If an AP MAC address is specified, the detailed status is displayed.
If the Unified Switch is a Cluster Controller, the command show all the APs managed by the peer group.
When acting as a Cluster Controller, the peer managed APs are displayed with an "*" (asterisk symbol) before the AP MAC
Address in the summary command.
Format
show wireless ap [<macaddr>] status
Mode Privileged EXEC
Field Description
macaddr WS managed AP MAC address.
MAC Address The Ethernet address of the WS managed AP.
© 2009 D-Link Corporation. All Rights Reserved
290