D-Link DWS-4000 Series Cli Command Reference page 61

Format
no set gmrp adminmode
Mode Privileged EXEC
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) or all interfaces
(Global Config mode). If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality is disabled on that interface. GARP functionality is subsequently re-enabled if routing is
disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.
Default disabled
Format
set gmrp interfacemode
Mode • Interface Config
• Global Config
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an interface which
has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is disabled.
GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from
an interface that has GARP enabled.
Format
no set gmrp interfacemode
Mode • Interface Config
• Global Config
show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.
Format
show gmrp configuration {<slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The slot/port of the interface that this row in the table describes.
Join Timer The interval between the transmission of GARP PDUs registering (or re-registering) membership for
an attribute. Current attributes are a VLAN or multicast group. There is an instance of this timer on a
per-port, per-GARP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0
seconds). The factory default is 20 centiseconds (0.2 seconds). The finest granularity of specification
is 1 centisecond (0.01 seconds).
Leave Timer The period of time to wait after receiving an unregister request for an attribute before deleting the
attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for
another station to assert registration for the same attribute in order to maintain uninterrupted service.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 20
to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds).
GMRP Commands
53