D-Link DWS-4000 Series Cli Command Reference page 368

D-Link Unified Switch CLI Command Reference
Field Description
Authenticated Shows the number of authenticated users connected to the network through this captive portal.
Users
show captive-portal configuration status
This command displays information of all configured captive portal configurations or a specific captive portal configuration.
Format
show captive-portal configuration <cp-id> status
Mode Privileged EXEC
Field Description
CP ID Shows the captive portal ID.
CP Name Shows the captive portal name.
CP Mode Shows whether the CP is enabled or disabled.
Protocol Mode Shows the current connection protocol, which is either HTTP or HTTPS.
Verification Mode Shows the current account type, which is Guest, Local, or RADIUS.
If you include the optional [cp-id] status keywords, the following additional information appears:
URL Redirect Mode Indicates whether the Redirect URL Mode is enabled or disabled.
Max Bandwidth Up The maximum rate in bytes per second (bps) at which a client can send data into the network.
(bytes/sec)
Max Bandwidth The maximum rate in bps at which a client can receive data from the network.
Down (bytes/sec)
Max Input Octets The maximum number of octets the user is allowed to transmit.
(bytes)
Max Output Octets The maximum number of octets the user is allowed to receive.
(bytes)
Max Total Octets The maximum number of octets the user is allowed to transfer, i.e., the sum of octets transmitted and
(bytes) received.
Session Timeout Shows the number of seconds a user is permitted to remain connected to the network. Once the
(seconds) Session Timeout value is reached, the user is logged out automatically. A value of 0 means that the
user does not have a session Timeout limit.
Idle Timeout Shows the number of seconds the user can remain idle before the switch automatically logs the user
(seconds) out. A value of 0 means that the user will not be logged out automatically.
show captive-portal configuration locales
This command displays locales associated with a specific captive portal configuration.
Format
show captive-portal configuration <cp-id> locales
Mode Privileged EXEC
Field Description
Locale Code Two-letter abbreviation for languages.
© 2009 D-Link Corporation. All Rights Reserved
360