D-Link DWS-4000 Series Cli Command Reference page 248

D-Link Unified Switch CLI Command Reference
Default 0 (any channel)
Format
standalone channel <channel>
Mode AP Config
Parameter Description
channel A valid channel from 0 to 161 from the all-country aggregate channel list. Channel zero indicates that
any valid channel is allowed.
no standalone channel
The no version of this command configures the expected channel for an AP in stand-alone mode to the default – any channel
is allowed.
Format
no standalone channel
Mode AP Config
standalone security (Stand-alone AP expected security mode)
This command configures the expected security mode for an AP in stand-alone mode.
Default any
Format
standalone security {any | open | wep | wpa}
Mode AP Config
Parameter Description
any All security modes are allowed; open security, WEP and WPA/WPA2.
open Only open security mode is allowed for the AP.
wep Only WEP security is allowed for the AP.
wpa Only WPA/WPA2 security is allowed for the AP.
no standalone security
The no version of this command configures the expected security mode for an AP in stand-alone mode to the default – any
security mode is allowed.
Format
no standalone security
Mode AP Config
standalone ssid (Stand-alone AP expected SSID)
This command configures the expected SSID for an AP in stand-alone mode.
© 2009 D-Link Corporation. All Rights Reserved
240