Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Term
Definition
Non-IP Traffic
The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is set to trust
Class
IP Precedence or IP DSCP (on platforms that support IP DSCP).
Untrusted Traffic
The traffic class used for all untrusted traffic. This is only displayed when the COS trust mode is set to
Class
'untrusted'.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show classofservice trust 0/1
Class of Service Trust Mode: Untrusted
Untrusted Traffic Class: 1
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The slot/port parameter is
optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the class-
of-service queue configuration of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Format
show interfaces cos-queue [<slot/port>]
Mode
Privileged EXEC
Term
Definition
Queue Id
An interface supports 8 queues numbered 0 to 7.
Minimum
The minimum transmission bandwidth guarantee for the queue, expressed as a percentage. A value
Bandwidth
of 0 means bandwidth is not guaranteed and the queue operates using best-effort. This is a configured
value.
Scheduler Type
Indicates whether this queue is scheduled for transmission using a strict priority or a weighted scheme.
This is a configured value.
Queue
The queue depth management technique used for this queue (tail drop).
Management Type
If you specify the interface, the command also displays the following information.
Term
Definition
Interface
The slot/port of the interface. If displaying the global configuration, this output line is replaced with a
Global Config indication.
Interface Shaping
The maximum transmission bandwidth limit for the interface as a whole. It is independent of any per-
Rate
queue maximum bandwidth value(s) in effect for the interface. This is a configured value.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show interfaces cos-queue 0/1
Interface...................................... 0/1
Interface Shaping Rate......................... 64
Queue Id
Min. Bandwidth
© 2009 D-Link Corporation. All Rights Reserved
380
Scheduler Type
Queue Management Type
Advertisement
Table of Contents
