D-Link DWS-4000 Series Cli Command Reference page 305

Field Description
RSSI Received Signal Strength Indication, this is an indicator of the signal strength relative to the neighbor
and may give an idea of the neighbor's distance from the managed AP.
Status Indicates the managed status of the AP, whether this is a valid AP known to the switch or a Rogue on
the network. The valid values are:
• Managed - The neighbor AP is managed by this switch or another switch within the peer group. The
neighbor AP status can be referenced using its base MAC address.
• Unknown- The neighbor APs detected in the RF scan are initially categorized as "Unknown" APs.
• Standalone - The AP is managed in standalone mode and configured as a valid AP entry (local or
RADIUS).
• Rogue - The AP intrusion Detection function has determined that the AP is posing a threat to the
network and categorizes the neighbor AP as "Rogue".
Age Indicates the time since this AP was last reported from an RF scan on the radio.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless ap 00:01:01:02:01:01 radio 1 neighbor ap status
MAC Address.................................... 00:01:01:02:01:01
Location....................................... FirstFloor
Radio.......................................... 1
Neighbor AP MAC
----------------- ---------------------------- ---- --------------- -----------
00:01:01:02:01:03 Network3
00:01:01:02:03:02 Network2
00:33:01:02:01:83 Lobby
show wireless ap radio neighbor client status
This command displays the status parameters for each client detected as a neighbor to the specified managed AP radio. A
client neighbor may be detected through one or more methods: RF scan on the radio, client association to a VAP on the
radio, or receiving a probe request from the client.
Format
show wireless ap <macaddr> radio <1-2> neighbor client status
Mode Privileged EXEC
Field Description
macaddr WS managed AP MAC address.
1-2 The radio interface on the AP.
MAC Address The Ethernet address of the WS managed AP.
Location A location description for the AP, this is the value configured in the valid AP database (either locally or
on the RADIUS server).
Radio Indicates a radio interface on the AP.
Neighbor Client The Ethernet address of the client station.
MAC
RSSI Received Signal Strength Indication, this is an indicator of the signal strength relative to the neighbor
and may give an idea of the neighbor's distance from the managed AP.
SSID RSSI
10
10
10
WS Managed Access Point Commands
Status
Managed 0h:2m:52s
Managed 0h:2m:55s
Unknown 0h:2m:49s
Age
297