D-Link DWS-4000 Series Cli Command Reference page 50

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
show vlan association subnet
This command displays the VLAN associated with a specific configured IP-Address and net mask. If no IP address and net
mask are specified, the VLAN associations of all the configured IP-subnets are displayed.
Format
show vlan association subnet [<ipaddr> <netmask>]
Mode
Privileged EXEC
Term
Definition
IP Address
The IP address assigned to each interface.
Net Mask
The subnet mask.
VLAN ID
There is a VLAN Identifier (VID) associated with each VLAN.
show vlan association mac
This command displays the VLAN associated with a specific configured MAC address. If no MAC address is specified, the
VLAN associations of all the configured MAC addresses are displayed.
Format
show vlan association mac [<macaddr>]
Mode
Privileged EXEC
Term
Definition
Mac Address
A MAC address for which the switch has forwarding and or filtering information. The format is 6 or 8
two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an
IVL system the MAC address will be displayed as 8 bytes.
VLAN ID
There is a VLAN Identifier (VID) associated with each VLAN.
© 2009 D-Link Corporation. All Rights Reserved
42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents