Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
no lacp actor admin key
Use this command to configure the default administrative value of the key.
Format
no lacp actor admin key
Mode
Interface Config
lacp actor admin state
Use this command to configure the administrative value of actor state as transmitted by the Actor in LACPDUs. The valid
value range is 0x00-0xFF.
Default
0x07
Format
lacp actor admin state {individual|longtimeout|passive}
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin state
Use this command the configure the default administrative values of actor state as transmitted by the Actor in LACPDUs.
Format
no lacp actor admin state {individual|longtimeout|passive}
Mode
Interface Config
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
Format
lacp actor admin state individual
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
Format
no lacp actor admin state individual
Mode
Interface Config
© 2009 D-Link Corporation. All Rights Reserved
82
Advertisement
Table of Contents
