D-Link DWS-4000 Series Cli Command Reference page 41

vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is reserved for
the default VLAN). VLAN range is 2-3965.
Format
vlan <2-3965>
Mode VLAN Config
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the default
VLAN). The VLAN range is 2-3965.
Format
no vlan <2-3965>
Mode VLAN Config
vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority frames
received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface
are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Default all
Format
vlan acceptframe {vlanonly | all}
Mode Interface Config
no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
Format
no vlan acceptframe
Mode Interface Config
vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the
VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
Default disabled
Format
vlan ingressfilter
Mode Interface Config
VLAN Commands
33