D-Link DWS-4000 Series Cli Command Reference page 424

D-Link Unified Switch CLI Command Reference
Term Definition
Packets • Total Bytes - The total number of octets of data (including those in bad packets) received on the
Transmitted Octets network (excluding framing bits but including FCS octets). This object can be used as a reasonable
estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and
etherStatsOctets objects should be sampled before and after a common interval. -----
• Packets Transmitted 64 Octets - The total number of packets (including bad packets) received that
were 64 octets in length (excluding framing bits but including FCS octets).
• Packets Transmitted 65-127 Octets - The total number of packets (including bad packets)
received that were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
• Packets Transmitted 128-255 Octets - The total number of packets (including bad packets)
received that were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
• Packets Transmitted 256-511 Octets - The total number of packets (including bad packets)
received that were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
• Packets Transmitted 512-1023 Octets - The total number of packets (including bad packets)
received that were between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
• Packets Transmitted 1024-1518 Octets - The total number of packets (including bad packets)
received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
• Max Frame Size - The maximum size of the Info (non-MAC) field that this port will receive or
transmit.
Packets • Total - The number of frames that have been transmitted by this port to its segment.
Transmitted
• Unicast Packets Transmitted - The total number of packets that higher-level protocols requested
Successfully
be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
• Multicast Packets Transmitted - The total number of packets that higher-level protocols requested
be transmitted to a Multicast address, including those that were discarded or not sent.
• Broadcast Packets Transmitted - The total number of packets that higher-level protocols
requested be transmitted to the Broadcast address, including those that were discarded or not sent.
Transmit Errors • Total Errors - The sum of Single, Multiple, and Excessive Collisions.
• Tx FCS Errors - The total number of packets transmitted that had a length (excluding framing bits,
but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check
Sequence (FCS) with an integral number of octets.
• Oversized - The total number of frames that exceeded the max permitted frame size. This counter
has a max increment rate of 815 counts per sec. at 10 Mb/s.
• Underrun Errors - The total number of frames discarded because the transmit FIFO buffer became
empty during frame transmission.
© 2009 D-Link Corporation. All Rights Reserved
416