Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-timeout
Mode
Global Config
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default
1
Format
sntp unicast client poll-retry <poll-retry>
Mode
Global Config
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-retry
Mode
Global Config
sntp multicast client poll-interval
This command will set the poll interval for SNTP multicast clients in seconds as a power of two where <poll-interval>
can be a value from 6 to 16.
Default
6
Format
sntp multicast client poll-interval <poll-interval>
Mode
Global Config
no sntp multicast client poll-interval
This command resets the poll interval for SNTP multicast clients to its default value.
Format
no sntp multicast client poll-interval
Mode
Global Config
sntp server
This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the version a
value of 1-4, and the port id a value of 1-65535.
Format
sntp server <ipaddress|hostname> [<priority> [<version> [<portid>]]]
Mode
Global Config
© 2009 D-Link Corporation. All Rights Reserved
438
Advertisement
Table of Contents
