D-Link DWS-4000 Series Cli Command Reference page 263

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

Default
Subnet IP - None
Subnet mask - 255.255.255.0
Format
tunnel subnet <ipaddr> [mask <mask>]
Mode
Network Config
Parameter
Description
ipaddr
A valid IP address.
mask
A valid subnet mask.
no tunnel subnet
The no version of this command deletes the configured tunnel subnet parameters.
Format
no tunnel subnet
Mode
Network Config
arp-suppression
This command enables wireless ARP suppression on the network. Enabling wireless ARP suppression allows for limiting
ARP broadcasts on the wireless medium for IPv4 networks.
Default
Disable
Format
arp-suppression
Mode
Network Config Mode
no arp-suppression
The no version of this command disables wireless ARP suppression on the network.
Format
no arp-suppression
Mode
Network Config Mode
wpa2 pre-authentication
This command enables WPA2 pre-authentication support for client roaming.
Default
Enable
Format
wpa2 pre-authentication
Mode
Network Config
no wpa2 pre-authentication
The no version of this command disables WPA2 pre-authentication support.
Wireless Network Commands
255

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents