D-Link DWS-4000 Series Cli Command Reference page 340

D-Link Unified Switch CLI Command Reference
wids-security client configured-auth-rate
Use this command to enable the test which marks the client as rogue if it exceeds the configured rate for transmitting 802.11
authentication requests.
Default Enable
Format
wids-security client configured-auth-rate
Mode Wireless Config
no wids-security client configured-auth-rate
Use this command to disable the test for checking if the client exceeds the configured rate for transmitting 802.11
authentication requests.
Format
no wids-security client configured-auth-rate
Mode Wireless Config
wids-security client configured-probe-rate
Use this command to enable the test which marks the client as rogue if it exceeds the configured rate for transmitting probe
requests.
Default Enable
Format
wids-security client configured-probe-rate
Mode Wireless Config
no wids-security client configured-probe-rate
Use this command to disable the test for checking if the client exceeds the configured rate for transmitting probe requests.
Format
no wids-security client configured-probe-rate
Mode Wireless Config
wids-security client configured-deauth-rate
Use this command to enable the test which marks the client as rogue if it exceeds the configured rate for transmitting 802.11
de-authentication requests.
Default Enable
Format
wids-security client configured-deauth-rate
Mode Wireless Config
no wids-security client configured-deauth-rate
Use this command to disable the test for checking if the client exceeds the configured rate for transmitting 802.11 de-
authentication requests.
© 2009 D-Link Corporation. All Rights Reserved
332