Table of Contents
Advertisement
3.4.5 Changing oil, axis-4 gearbox
Location of gearbox
The axis 4 gearbox is located in the rearmost part of the upper arm as shown in
the figure below.
xx0200000231
A
B
Required equipment
Equipment, etc.
Lubricating oil
Oil exchange equipment
Oil collecting vessel
Standard toolkit
Draining, oil
The procedure below details how to drain the oil in the gearbox, axis 4.
When using the oil exchange equipment, follow the instructions enclosed with the
kit. Art. no. for the kit is specified in
1
Product manual - IRB 6650S
3HAC020993-001 Revision: Z
Oil plug, filling
Oil plug, draining
Art. no.
See
amount of oil in
gearboxes on
page
3HAC021745-001
-
-
Action
Run the upper arm -45° from the calibration
position.
© Copyright 2004-2018 ABB. All rights reserved.
3.4.5 Changing oil, axis-4 gearbox
Amount
Type and
See
Type
and
amount of
172.
oil in gear-
boxes on
page
172.
Required equipment on page
Note
3 Maintenance
Note
Content is defined in section
Special tools on page
436.
Capacity: 9,000 ml.
Content is defined in section
Standard tools on page
435.
183.
Continues on next page
183
Advertisement
Table of Contents
