Table of Contents
Advertisement
2 Installation and commissioning
2.3.11 Installation of cooling fan for motors (option)
2.3.11 Installation of cooling fan for motors (option)
General
A cooling fan can be installed on the motors of axes 1, 2 and 3.
Cooling fans for axes 1 and 2 can not be combined!
The cabling for the fans is available in different designs:
Location of cooling fans
The fans are installed on the motors, axes 1 or 2, as shown in the figure below.
xx1800000169
A
B
Continues on next page
90
•
complete cabling, including connections for both cooling fans and position
switches, at axes 1, 2 and 3. Installation of this complete cabling is detailed
in section
Installation of cable harness for position switches and fans on
page
115.
•
separate cabling for axis 1 or 2, including only connections for the cooling
fans on axes 1 or 2. Installation of this cabling is detailed in section
Installation, separate fan cabling axis 1 or 2 on page
Cooling fan, axis 1
Cooling fan, axis 2
© Copyright 2004-2018 ABB. All rights reserved.
94.
xx1800000170
Product manual - IRB 6650S
3HAC020993-001 Revision: Z
Advertisement
Table of Contents
